Microcontrollers(650)

Smart Home Audio(325)

M253ZE3AE

M253ZE3AE

M253ZE3AE 32-bit microcontroller is based on Arm Cortex-M23 core for Armv8-M architecture. It runs up to 48 MHz and features 128 Kbytes Flash, 16 Kbytets SRAM, 1.75V ~ 5.5V wide operating voltage, and -40°C to 105°C operating temperature. 

M253ZE3AE includes a crystal-less USB 2.0 full speed device and one set of CAN FD interface. The USB interface supports up to 17 configurable endpoints, up to 5 VCOMs, and maximum 1 Kbytes buffer size. 

M253ZE3AE provides plenty of peripherals such as Timers, Watchdog Timers, 5 channels of PDMA, 5 sets of UART, 2 sets of I2C, 1 set of SPI/I2S and 1 set of Universal Serial Control Interface (USCI). It also includes high performance analog front-end circuit blocks, such as 10 channels of 12-bit 880 kSPS ADC, 6 channels of 16-bit PWM, and a temperature sensor to enhance product performance, to reduce external components and form factor simultaneously.

Supported packages QFN32 ( 5 mm x 5 mm ) with pin-compatible for different part numbers make the system design and parts change easily.

Target Application:

  • USB Bridge
  • Data Collector
  • Battery Management System
  • Automotive Related Module

Key Features:

Operating Characteristics
  - Voltage range: 1.75V ~ 5.5V
  - Temperature range: - 40 ℃ ~ 105 ℃
  - EFT 4.4 KV
  - ESD HBM 7 KV
   
Core
  - Arm Cortex-M23 core using Armv8-M architecture, running up to 48 MHz, without TrustZone
  - 32-bit hardware multiplier/divider
     
Memories
  - 128 KB Flash
  - 16 KB SRAM
  - 4 KB LDROM
  - ISP/ICP/IAP programming
     
Clocks
  - 4 ~ 32 MHz external high speed crystal oscillator (HXT) for precise timing operation
  - 32.768 kHz external low speed crystal oscillator (LXT) for RTC function and low-power system operation
  - 48 MHz internal high speed RC oscillator (HIRC) for system operation (Factory pre-trimmed to ±0.25% and frequency deviation ±2.5% over entire temperature from -40°C ~  +105 °C
  - 4.032 MHz internal high speed RC oscillator (MIRC) for system operation
  - 38.4 kHz internal low speed RC oscillator (LIRC) for Watchdog Timer and wake-up operation
     
Power management
  - Integrated with Power-on Reset, Brown-out Reset and Low Voltage Reset
  - Built-in LDO
   
Low Power Consumption
  - 130 μA/MHz in operating mode
  - 35 μA/MHz in idle mode
  - 1.7 μA in Power-down mode (RTC off, RAM retention)
     
Timers
  - Four 32-bit timers
  - One 24-bit SysTick timer
  - One independent watchdog
  - One window watchdog
  - RTC with Calendar and Alarm
     
PDMA
  - 5 channels
  - Channel can be operated by – software trigger, SPI/I²S, UART, I²C, USCI, ADC and Timer
   
Analog
  - 10 channels of 12-bit 840 kSPS ADC
     
Communication interfaces
  - 5 sets of UART interfaces
  - 2 sets of I²C interfaces
  - 1 set of SPI/I²S
  - 1 set of USCI (configured as UART, SPI or I²C)
     
CAN FD
  - 1 set of CAN FD controller with up to 64 data bytes per message
  - Compliant with CAN protocol version 2.0 part A, B and ISO 11898-1: 2015
  - Programmable receive and transmit FIFO
  - Accessible 1-Kbyte RAM memory to allocate up to 256 words
     
USB
  - Supports 17 endpoints for configurable Control/Bulk/Interrupt/Isochronous transfer types and maximum 1024 bytes’ buffer size
  - Compliant with USB 2.0 Full-Speed specification
  - Provides 1 interrupt vector with 4 different interrupt events (NEVWK, VBUSDET, USB and BUS)
     
96-bit Unique ID ( UID )
     
128-bit Unique Customer ID ( UCID )
     
Packages
  - QFN33 ( 5 mm x 5 mm )