Microcontrollers(639)

Smart Home Audio(325)

M0A23OC1ACU

M0A23OC1ACU

The NuMicro® M0A23OC1ACU is an automotive 32-bit microcontroller based on Arm® Cortex®-M0 core which is AEC-Q100 Grade 1 qualified. It provides compact package with highly flexible digital pin function assignment, rich analog peripherals, -40°C to 125°C operating temperature, 2.4V ~ 5.5V operating voltage, CAN 2.0B and LIN interface for robust communication. The NuMicro® M0A23OC1ACU targets robust and high operating temperature applications, such as Battery Management System (BMS), car lighting, electric window lifter, and power seat.

The NuMicro® M0A23OC1ACU provides SSOP20 package with rich analog and digital functions, which are especially suitable for small form factor applications. SSOP20 provides up to 18 IO pins. Each IO pin of the M0A23OC1ACU can be arbitrarily assigned to digital peripherals, such as UART, SPI and PWM. The M0A23OC1ACU provides rich analog functions including 17-ch 12-bit 500 KSPS ADC, 1 set of 5-bit DAC and 2 sets of ACMP in SSOP20 package. Moreover, it provides low voltage reset (LVR) and brown-out detector (BOD) to ensure the system safety.

The NuMicro® M0A23OC1ACU runs up to 48 MHz and supports hardware divider. It provides 32 Kbytes Flash memory, 4 Kbytes SRAM and 2 Kbytes LDROM for ISP (In-System Programming) feature for easily firmware update. It is equipped with plenty of peripherals including up to four 32-bit timers, 6-ch 16-bit PWM generators, 1 set of CAN 2.0B controller, 2 sets of LIN functions, 5-ch PDMA, 2 sets of UART with One-Wire mode, IrDA and RS485 functions. Besides, the M0A23OC1ACU provides two sets of Universal Serial Control Interfaces (USCI) that can be configured as UART, SPI or I²C.

The package types of the M0A23OC1ACU is SSOP20 (5.3 x 7.2 x 1.75 mm).

Target applications:

  • BMS (Battery Management System)
  • Car lighting
  • Electric window lifter
  • Power seat

 Key Features:

AEC-Q100 Grade 1 qualified
   
Core
  - Arm® Cortex®-M0 core running up to 48 MHz
  - Single-cycle 32-bit hardware divider
     
Memories
  - 32 KB Flash for program code
  - Up to 4 KB SRAM
  - 2 KB SRAM
  - Supports In-System-Program (ISP) and In-Application-Program (IAP) application code update
     
Peripheral DMA (PDMA)
  - Supports up to 5 independent configurable channels for automatic data transfer between memories and peripherals
   
CRC calculation unit
  - Supports CRC-CCITT, CRC-8, CRC-16 and CRC-32 polynomials
   
Clocks
  - Internal 48 MHz RC oscillator (frequency drift <± 2 % @ - 40 ℃ ~ 105°C, <± 3 % @- 40 ℃ ~ 125 °C)
  - Internal 38.4 kHz RC with calibration (frequency drift <± 10 % @ - 40 ℃ ~105 ℃, < ± 15 % @ - 40 ℃ ~ 125 ℃)
  - 4 to 24 MHz crystal oscillator
  - 32.768 kHz crystal oscillator
     
Timers/PWM
  - 4 sets of 32-bit timers
  - 6-ch 48 MHz 16-bit PWM
  - One 24-bit SysTick Timer
  - Watchdog Timer
  - Window Watchdog Timer
     
Analog
  - 17-ch 12-bit 500 kSPS ADCs
  - Two analog comparators (ACMP)
  - One 5-bit DAC
  - One built-in temperature sensor
     
Communication interfaces
  - 2 sets of UART interfaces with One-Wire mode, IrDA, RS-485 and LIN function
  - 2 sets of USCI interfaces to be configured as UART, SPI or I²C
     
CAN Bus
  - 1 set of CAN interface, supporting CAN protocol version 2.0 part A and B
     
Up to 18 GPIOs in SSOP20
     
Operating Characteristics
    Voltage range: 2.4 V to 5.5 V
    Temperature range: - 40 ℃ to 125 ℃
     
96-bit Unique ID (UID)
  - Can be used as a security key
     
128-bit Unique Customer ID (UCID)
     
Package
  - SSOP20
本網站使用cookie作為與網站互動時識別瀏覽器之用,瀏覽本網站即表示您同意本網站對cookie的使用及相關隱私權政策
OK